Skip to main content
arrow_left_alt News

Train-truck collision reveals level crossing safety gaps

A freight train struck a heavy truck that had become immobilised on the Elizabeth Street level crossing at Waikanae. The driver escaped seconds before impact. Our investigation found that an unexpected brake application stopped the truck and identified four wider safety issues involving permits, risk assessment and emergency warning. Level crossing safety depends on road and rail operators understanding and following agreed protections. Those protections also need to be properly assessed, communicated and checked. This report has lessons for heavy haulage operators and pilots, rail infrastructure managers, road controlling authorities and others responsible for safety where roads and railway tracks meet.

Publishing notes

Newsletter
Published on
Prime mover stopped on the crossing; alarms and barriers are activated
Figure 4 from the report: Prime mover stopped on the crossing; alarms and barriers are activated

What happened 

On the morning of 15 October 2025, a truck and trailer carrying a large articulated dump truck turned from Main Road onto the Elizabeth Street level crossing in Waikanae. It stopped unexpectedly on the crossing and the driver was unable to get it moving again.  

Meanwhile, a northbound freight train approached. Its driver applied emergency braking, but the train struck the truck at 68 kilometres per hour. The truck was extensively damaged. 

There were no injuries; the truck driver had escaped just five seconds before the collision.  

Damage to prime mover cab
Figure 6 from the report: Damage to prime mover cab

Why it happened 

Proximate cause: The truck was stuck on the crossing because its trailer brakes were forced on, uncommanded by the driver, and remained on. During the tight turn from the main road onto the crossing, the air brake hoses were disconnected due to an incorrectly stowed broom.  

Circumstances: train control was not alerted about the blocked crossing. 

  • No phone call from truck to train control. The trucking operator considered it did not need to contact train control before crossing. This belief dated back to a 2014 permit that said no notification was required. As likely as not, that permit confused 'traction control', which manages electricity supply, and 'train control', which manages train movements. The original arrangement concerned clearances from overhead electric power lines. KiwiRail repeated the ‘train control’ exemption in permits issued every six months for ten years. It removed the exemption in May 2024 but did not tell the operator that it now had to contact train control. Safety Issue (1) relates. 
  • Weaknesses in permit management allowed the misunderstanding to continue. KiwiRail treated permit renewals and changes as administrative matters, without adequate. Safety Issue (2) relates. operational risk assessment or a system to monitor compliance with permit conditions. 
  • No automatic system to detect an obstruction and alert train control. An automatic alert would likely have provided an opportunity to slow the train or possibly stop it. Safety Issue (3) relates. 
  • No emergency phone number was displayed at the crossing for the public to tell train control about the blockage. That said, a displayed emergency number would have been unlikely to avoid this particular collision. Safety Issue (4) relates. 

Safety issues, recommendations and lessons 

The Commission identified four safety issues and made four recommendations (wording below paraphrases the report). 

1. Level crossing permits: check current conditions: The truck operator considered it remained exempt from contacting train control. This meant an important safety control was not used. 

  • Recommendation 032/26: that NZTA work with KiwiRail and the NZ Heavy Haulage Association to identify operators relying on unratified historical exemptions and ensure heavy haulage companies understand and meet their permit obligations. 
  • Lesson: Operators of trucks and pilot vehicles should check their current permits, including any requirement to contact train control; don’t rely on historical perceptions. 

2. Permit systems need operational risk assessment: KiwiRail's permit renewal and variation processes were treated as administrative work. Safety risk assessment and monitoring of compliance were inadequate. 

  • Recommendation 033/26: for KiwiRail to ensure appropriate operational personnel assess the risks of permits and variations to standard practice. 
  • Lesson: A permit is a safety control; issuing or changing one should involve people who understand the operating risks. 

3. Earlier warning when a crossing is obstructed: There was no system to alert train control that the crossing was blocked. An earlier alert would likely have given an opportunity to slow the train or potentially stop it before reaching the crossing. 

  • Recommendation 034/26: for KiwiRail to identify and implement practicable early-warning systems for level crossing emergencies. 
  • Lesson: Automated early information makes a difference. Detecting obstructions should not depend entirely on humans raising the alarm. 

4. Make emergency contact information easy to find: The train control emergency number and crossing location details were not displayed at the crossing. The emergency number was also absent from the permit. 

  • Recommendation 035/26: for KiwiRail to display this information prominently at crossings where practicable. And include it on permits. 
  • Lesson: Drivers and members of the public should be able to identify a crossing and report an emergency quickly in future. 

Operator and industry safety actions 

The Commission welcomes numerous safety actions as a result of this inquiry: 

  • The truck operator Goodmans has modified the air brake system used on its trucks, including changes to the couplers and connections to reduce the risk of unexpected disconnection. 
  • KiwiRail has instructed its staff not to use the historical arrangement understood by Goodmans. It has told TAIC it plans to improve permit assessments, investigate early-warning technology and review the provision of emergency contact information. 
  • The NZ Heavy Haulage Association has undertaken to issue safety alerts about contacting train control when required and the risk of brake line disconnections. 

TAIC Watchlist 2026: the road-rail interface (level crossings) 

The Commission is calling on regulators, operators and road controlling authorities nationwide to work together to improve safety at level crossings. This includes accommodating large vehicles, providing road drivers with adequate sight lines, and ensuring that people using or working at crossings understand the risks and the protections available. 

The Elizabeth Street collision shows why this work matters. A mechanical problem unexpectedly left a heavy truck on a crossing. Effective permit arrangements and early warning systems could have reduced or even negated the risk of a collision. 

Read Watchlist 2026: https://taic.org.nz/watchlist 

Last updated: Thursday, 19 November 2026 - 04:00